OzHadou - Discussion Forum

Hardware, Tech and Setups => Tech Talk => Topic started by: shattereddreams on September 06, 2013, 12:12:30 PM

Title: Fightstick direction malfunction
Post by: shattereddreams on September 06, 2013, 12:12:30 PM
Hey guys,

Purchased a customised fight stick many years ago and it's always been working fine. However, recently the up-direction on the stick has stopped functioning. All the other buttons and directions work fine.
Is this a common problem with an easy fix? Or is there any place I can get this repaired?

Any help would be appreciated. Thanks :)
Title: Re: Fightstick direction malfunction
Post by: Madenka AU on September 06, 2013, 12:25:25 PM
Are you able to open it up and check the micro switches? Sounds like a switch problem.

Which area are you from?
Title: Re: Fightstick direction malfunction
Post by: kyokugen on September 06, 2013, 03:27:01 PM
If the up direction doesn't work to any capacity, perhaps the wire from the PCB to the JLF TP-MA (or whatever switches) has become disconnected.

Depending on the custom PCB used, you may need to solder it back on.